Epoxy Flake Garage Floors for Baulkham Hills Homes and Businesses
Vinyl chip broadcast to rejection over a pigmented base, sealed with two coats of polyaspartic. The workhorse finish for garages, laundries and workshops. Free on-site assessments across Baulkham Hills and the rest of Hills District.
- Build thickness
- 1.2–1.8 mm
- Topcoat
- Polyaspartic
- Foot traffic
- Same evening
- Drive on
- 72 hours
What a Baulkham Hills epoxy flake garage job involves
Between Baulkham Hills and the rest of Hills District we see the same slab problems repeatedly — and the fix is always in the preparation, not the product.
A flake floor is built in layers, not painted on. We diamond-grind the slab back to a CSP 2–3 profile, cut out and fill the cracks, roll a penetrating epoxy primer, then lay a pigmented base coat and throw vinyl chip into it while it is still wet — to rejection, so the whole floor is covered. Once it cures we knock the flake back flat, vacuum, and finish with two coats of polyaspartic.
The result is roughly 1.2 to 1.8 mm thick, seamless, and immune to the hot-tyre pickup that lifts cheap garage paint off a slab in the first summer. Oil wipes straight off it, and a soft broom is the only maintenance it needs.
What is included
- Diamond grind and edge preparation
- Crack and spall repair included to 5 linear metres
- Epoxy primer plus pigmented base coat
- Full flake broadcast in your choice of blend
- Two-coat polyaspartic topcoat
- Anti-slip additive available on request
The specification
| Build thickness | 1.2–1.8 mm |
|---|---|
| Topcoat | Polyaspartic |
| Foot traffic | Same evening |
| Drive on | 72 hours |
| Typical job | 2–3 days |
How the job runs in Baulkham Hills
- We come to Baulkham Hills, measure the area, moisture-test the slab and photograph anything that needs repair.
- You get a written quote within two business days with preparation, repairs and coats itemised separately.
- On day one we diamond-grind the surface back and cut out the cracks, with dust extraction running throughout.
- The system goes down in coats, each one checked with a wet film gauge before the next.
- We hand back a clean floor with the colour, batch numbers and cure times written down for your records.
Questions we get in Hills District
How long before I can park on it?
Foot traffic the same evening the topcoat goes down, vehicles at 72 hours. That figure is not negotiable — driving on a green coating imprints hot tyre marks that never lift.
Will it peel like my last garage floor?
Only if the preparation is skipped. Coatings peel because they went over a sealed, acid-etched or damp slab. We grind mechanically and moisture-test before quoting, which removes the two causes behind almost every failure we are called out to fix.
Can I choose the flake colour?
Yes. We bring the full colour chart to the site assessment and match the blend against your walls, joinery and roller door in the light the floor will actually live in.
How much does it cost to epoxy a double garage in Sydney?
A standard double garage of about 36 m² starts from around $2,700 excluding GST. The final price depends on the state of the slab and how much repair it needs, and we confirm it in a written quote after a free site visit.
Can you coat over an old painted or sealed garage floor?
Yes. Old paint and sealer are ground off during preparation, so the new coating bonds to bare concrete. Coating straight over old paint is the most common reason garage floors peel.
Is an epoxy garage floor slippery?
A flake floor has a slight texture that helps grip, and an anti-slip additive can be added to the topcoat on request. Like any smooth floor, it is more slippery when wet, so the additive is worth it near a door that lets rain in.
Do I need to empty the garage?
Yes. The whole floor needs to be clear for grinding and coating, and it needs to stay clear until the coating has cured.
Do you service Baulkham Hills?
Yes. Baulkham Hills 2153 is inside our standard service area in Hills District, along with the surrounding suburbs. There is no travel loading on quotes inside the Sydney metro area, and regional jobs are quoted with a clearly itemised mobilisation allowance.
Epoxy Flake Garages near Baulkham Hills
We cover Hills District and the surrounding areas. Same crew, same preparation standard, no travel loading inside the metro area.
Epoxy Flake Garages in Baulkham Hills — Book Your Free Assessment
Tell us about the job and we'll come back with a price. The on-site assessment is free.
Or call 0470 347 292 ↗Mon–Sat, 6:30am–5pm